It broke.
My newly acquired Olympus OM4ti decided to lock up and not work again after shooting just two rolls.
Inserting roll number three and winding the leader on, the wind mechanism stopped with the shutter curtains only half way across. With some gently applied force, it did complete the wind on, but then the shutter wouldn't fire. I pressed the rewind button which disengaged the winding spool and rewound the film to get it out, but then the rewind button wouldn't return to it's normal state leaving the winding spool disengaged. Did the whole search the internet thing for troubleshooting, but nothing helped.
So, it's been sent to PPP Cameras in the UK for repair. To be fair, the fact that it was immaculate, had no signs of use and was boxed with even the box looking like new, did ring a very quiet alarm bell in my head. If it's been sitting in a drawer for the last thirty or so years, then it's likely that the lubricants would have reached an almost cement-like state. But enough with the speculation.
In the meantime, I did what any self-respecting human being would do and bought another body...
...and a lens, the 35mm-70mm f/3.6, both from Soper Photographic in Plymouth.
The eagle-eyed among you will notice that this is an OM4T as opposed to OM4ti. It's just the name it was given in the U.S.
I do wonder what eagles call it when someone has great eyesight...
It's been used and it shows. Apart from some nice looking wear to the paintwork in places and a horrible-but-useful 3D printed grip, the winding mechanism feels less stiff, which just reinforces my belief that the issue with my broken copy is horribly aged lubricant.
Anyway, this was going to be more technical run down of what this camera can do, but I've not had enough time to get to grips with the spot-metering system, so here's a quick list of the specifications:
____________
It's a whole 30g lighter than the regular OM4, due to the top and bottom plates being titanium. That 30g saving will be much appreciated by the donkey I employ to carry my gear.
It uses normal, easy to get hold of, LR44 batteries.
The viewfinder has a dioptre adjustment for those of us who aren't eagles.
ISO settings run from 6 to 3200 with lots of steps in between the full stops.
There's a choice of Manual or Aperture Priority modes. In Aperture Priority mode, the shutter speeds are stepless, making for a more accurate exposure.
Shutter speeds run from 1 second to 1/2000s with bulb mode and flash sync at 1/60s. Apparently, the shutter will run up to four minutes in auto mode for long exposures. Nice.
Speaking of flash, if you attach the Olympus F280 flash unit, it will sync all the way up to 1/2000s.
Useful for those who use flash a lot and perhaps understand it. I don't and I don't.
It has a spot-metering system built in, which you can use like a regular spot meter, but it also has the ability to take up to eight readings and then average them out.
You also get two buttons for the spot meter, 'Highlight' and 'Shadow', which will automatically compensate by two stops.
Of course, you also get a regular exposure compensation dial.
You get access to the fantastic line-up of legendary Zuiko lenses. And if you enjoy shooting vintage lenses on a digital body as well, it's a win-win.
____________
I'll update again when I either get time to go and shoot with the new lens or the repair person tells me what went wrong with the broken body.
In the meantime, here's some frames shot with the OM4ti before it broke using the 135mm f/2.8.
135mm is new territory for me as I've pretty much only ever used 28mm, 35mm or 50mm primes since I started my journey all those years ago.
Ilford Delta 100, developed in Ilford DDX at 20°C for 10m 30s.
Lens was the Zuiko 135mm f/2.8
Scanned on the Plustek 8100 with VueScan. Minor post processing in Darktable.
Weather was cloudy with sunny patches. Metered in-camera.










No comments:
Post a Comment